|
DSB, an abbreviation of ''Danske Statsbaner'' (''Danish State Railways''), is the largest Danish train operating company, and the largest in Scandinavia. While DSB is responsible for passenger train operation on most of the Danish railways, goods transport and railway maintenance are outside its scope. DSB runs a commuter rail system, called S-train, in the area around the Danish capital, Copenhagen, that connects the different areas and suburbs in the greater metropolitan area. DSB also operates some trains in Sweden. DSB was founded in 1885 when the state-owned companies ''De jysk-fynske Statsbaner'' and ''De sjællandske Statsbaner'' merged. ==History== The first railways in Denmark were built and operated by private companies. The railways in Funen and Jutland were built by Peto and Betts who also supplied the locomotives (built by Canada Works, Birkenhead). Most of the technical staff was also recruited from Britain, notably from the Eastern Counties Railway. When Peto and Betts went into insolvency, the Danish state took over ''Det danske Jernbane-Driftsselskab'' (The Danish Railway Operating Company) as of September 1, 1867 under the name ''De jysk-fyenske Jernbaner'' (the Funen and Jutland Railways), from 1874 ''De danske Statsbaner i Jylland og Fyn'' (The Danish State Railways in Jutland and Funen). The network was extended by new construction and by acquisition of the privately operated lines from Silkeborg to Herning (November 1, 1879) and from Grenaa to Randers and Aarhus (April 1, 1881). The Danish state took over ''Det sjællandske Jernbaneselskab'' (the Railway Company of Zealand) on January 1, 1880, forming ''De sjællandske Statsbaner'' (the State Railways of Zealand). With the majority of railways on both sides of the Great Belt thus owned by the Danish state, it was not until October 1, 1885 that the companies of Jutland/Funen and Zealand merged into one national railway company, ''De danske Statsbaner'' (the Danish State Railways), the merger being finalised on April 1, 1893. After the merger, new lines were constructed and a new generation of rolling stock and locomotives were introduced by chief mechanical engineer Otto Busse. After Busse's retirement, however, DSB ceased to design its own locomotives and increasingly came to rely on outside suppliers, mainly Borsig of Berlin. The nineteen-thirties were a decade of innovation and modernisation for DSB. New railway bridges were built across the Little Belt (1935), the Storstrøm (1937) and Oddesund (1938), eliminating the costly and time-consuming process of transfer by steam ferry. The suburban lines in and around Copenhagen were electrified for multiple-unit operation at 1,500 Volts DC (''S-trains''). Early experiments with Diesel propulsion led to the development of the all-purpose MO class heavy diesel-electric railcar equipped for multiple-unit operation, after World War II also fitted for push-pull operation with a driving trailer. Several classes of mainline diesel-electric locomotives were also built as prototypes by Burmeister and Wain of Copenhagen and Frichs of Aarhus, but further development was cut short by the German occupation and the consequent shortage of oil supplies, forcing DSB to rely on coal-burning steam locomotives for mainline duties. Coinciding with the opening of the Little Belt Bridge in 1935, DSB introduced their new express train concept known as ''lyntog'' ("lightning trains"). These diesel-powered three- and four-coach trains, having a power car at each end with a power pack identical to that of the MO railcar series, featured a then-impressive top speed of 120 km/h as well as a high level of comfort, and they proved themselves DSB's most commercially successful initiative of the 1930s. World War II left DSB with a fleet of outdated and worn-out trains, and apart from a series of second-generation MO railcars and the class MT multi-purpose centercab engines built by Frichs, domestic industry was unable to provide the kind of motive power required. Instead, DSB looked to foreign suppliers. General Motors' diesel-electric locomotives had proved themselves in the US and Canada before the war. DSB's class MY A1A-A1A diesel locomotives, built on license from GM and delivered from NOHAB starting in 1954, were found to be very reliable and economically feasible compared to the steam locomotives, eventually putting the age of steam to an end as well as being a decisive factor in DSB's choice of motive power for nearly three decades. They were followed by the equally successful class MX with a lower axle load for branch line services and the class MZ for heavy express services. Based on three diesel-hydraulic shunting locomotives built by Henschel and acquired by DSB, Frichs developed their own version of the class MH shunter, which replaced the steam-powered shunting engines. After the success of the Deutsche Bundesbahn's VT 11.5 class on Trans Europ Express services, DSB acquired eleven power cars and matching intermediate cars to replace the first-generation ''lyntog''. The 1960s were marked by an increasingly poor economy for DSB, leading to a steady staff reduction throughout the decade. However, this was also accompanied by the appearance of new technology, notably the utilisation of electronic equipment, improving the safety and efficiency of DSB's railway traffic. In 1972, along with the celebration of the 125th anniversary of railways in Denmark, DSB introduced a new corporate design by architect Jens Nielsen, inspired by British Railways and Canadian National Railways, with red as the dominant colour (with engine rooms of locomotives painted black), replacing the traditional maroon livery with yellow winged wheel symbols. DSB's position was additionally strengthened by the oil crisis in 1973. Following the lead of the Netherlands Railways, British Railways and Deutsche Bundesbahn, DSB in 1974 introduced a fixed interval timetable for its long-distance locomotive-hauled Intercity trains as well as the commuter services to and from Copenhagen. On regional services in Funen and Jutland, the prewar design MO class railcars were displaced by MR class DMUs, a licensed version of the Deutsche Bundesbahn VT 627. In 1990, after a delay of several years, the IC3 trains came into use, initially as ''lyntog'', and in 1991 as ordinary intercity trains. The IC3 trains, being a specimen of the Flexliner type of multiple units, have a distinct appearance due to the rubber-framed ends, allowing access between trainsets when coupled together. The re-engined Flexliners are now (2014) nearing the end of their service life, but due to problems with the Ansaldo Breda built successor class IC4 they are expected to remain in service for another five to ten years. The Great Belt fixed link was opened for railway traffic in 1997 (a year before road traffic), replacing DSB's railway ferries. In 1997, infrastructural duties were branched off into a new agency under the Danish Ministry of Transport, Banestyrelsen (now: Banedanmark), leaving DSB with the task of train operation. A new design was presented in 1998, as well as the announcement of the "Good Trains for All" plan, seeking to replace old and less comfortable trains by 2006/2007. DSB was turned into an independent public corporation on January 1, 1999. The goods department of DSB, DSB Gods, was merged with Railion (now DB Schenker Rail) in 2001, and DSB now solely manages passenger rail service, including the operation of railway stations.〔(【引用サイトリンク】title=Railion recruits another member )〕 In 2003, Arriva, in competition with DSB, won the tender for operating a number of regional railway services in Jutland: Tønder-Esbjerg, Esbjerg-Struer, Skjern-Aarhus, Struer-Langå-Aarhus and Struer-Thisted. In 2007, the Oresundtrain services were hived off into a separate company, DSBFirst. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「DSB (railway company)」の詳細全文を読む スポンサード リンク
|